Why Do-It-Yourself Data Recovery Methods Fail and What to do

In childhood, we were taught to be independent and our mother and teachers used to tell us as that the more we perform do-it-yourself tasks, the better we will become in our lives; which, however, is not true in the case where some really sensitive data is at stake! Here, if we apply our DIY methods, then we are putting really crucial data in danger.

In the data recovery segment, there are many instances where customers try to recover data all by themselves. Uses of professional data recovery software to recover files is surely heard to be good-to-try way, but what about all these DIY (do-it-yourself) methods, do they work, why they fail and what to do is they fail?

4 DIY Data Recovery Ways and Reasons Why They Fail

1.      Leaving Hard Drive in Freezer: There is more of an urban legend which tells that if you leave your hard disk drive in refrigerator or the freezer it will get fixed. This is an out-and-out myth and is not true. If you do this thing, only thing that will be achieved will be a frozen and also sometimes, a broken hard disk drive.

2.      Restart Your System a Couple of Times: When your system does not work properly, and you hear some unusual sounds, then it is quite likely that many people tend to restart the machines multiple times. This is a myth that by doing so, they think that the problem will get corrected all by itself. The best and safest thing to be done in such a situation is that if the user is totally unclear about what had happened to his hard disk drive, it is often recommended that the user must switch the system off right away and immediately call a good data recovery agency of good repute.

3.      Replacing Your Hard Disk Parts: In the circumstance where the hard disk drive of a user has had a failure, some users think that the drive needs some spare parts. But, this is not an easy thing to do, as there are many complications which come into play while replacing the hard disk parts. For instance, you need to be doubly sure whether the new circuit board firmware is fully compatible with all other drive parts. Additionally, it is also mandatory to consider the environment where recovery is taking place, if the user has a cleanroom with minimum required standards. This is why, professional and reputable recovery professionals are always recommended.

4.      Re-Writing Data That Is Lost: This is a toughest thing to do! But most users think that they cannot recover their data after their system has been into some serious accident (like broken drive, or a burnt drive), which is a misconception; as in such a case, it is always better to call some professional data recovery firm of good repute who can do the needful for you through their efficient data recovery tools.

The Story Ends with a Positive Note !

In most of the data loss cases, you rest with chances of data recovery. You can recover files using a good data recovery software tool. 

It is very simple to recover data using such tools and you can either use them all by yourself taking technical support online from those guys or you can even assign the entire job to them. Both ways, you have chances of complete data recovery. There are many such tools available in the market which can do the needful for you. Some of them are very much well-known and popular for their good work and positive results of their data recovery software tools.